Heavy Wall Steel Pipe are a dual certified tube to EN BS 10255 and BS EN 10217-1. If the size you require is not listed please contact us on sales@pipedreamfittings.com

Dimensions:

1-1/4″ – 42.16MM

1-1/2″ – 48.26MM

2″ – 60.33MM

2-1/2″ – 76.1MM

3″ – 88.9MM

4″ – 114.3MM

5″ – 139.7MM

6″ – 165.1MM

The post Heavy Wall Grooved Red Oxide Steel Pipe / Tube 3200MM Lengths appeared first on Pipe Dream Fittings.

Heavy Wall Steel Pipe are a dual certified tube to EN BS 10255 and BS EN 10217-1. If the size you require is not listed please contact us on sales@pipedreamfittings.com

Dimensions:

1-1/4″ – 42.16MM

1-1/2″ – 48.26MM

2″ – 60.33MM

2-1/2″ – 76.1MM

3″ – 88.9MM

4″ – 114.3MM

5″ – 139.7MM

6″ – 165.1MM

The post Heavy Wall Grooved Galvanised Steel Pipe / Tube 3200MM Lengths appeared first on Pipe Dream Fittings.

Medium Wall Steel Pipe are a dual certified tube to EN BS 10255 and BS EN 10217-1. If the size you require is not listed please contact us on sales@pipedreamfittings.com

Dimensions:

1-1/4″ – 42.16MM

1-1/2″ – 48.26MM

2″ – 60.33MM

2-1/2″ – 76.1MM

3″ – 88.9MM

4″ – 114.3MM

5″ – 139.7MM

6″ – 165.1MM

The post Medium Wall Grooved Red Oxide Steel Pipe / Tube 3200MM Lengths appeared first on Pipe Dream Fittings.

Medium Wall Steel Pipe are a dual certified tube to EN BS 10255 and BS EN 10217-1. If the size you require is not listed please contact us on sales@pipedreamfittings.com

Dimensions:

1-1/4″ – 42.16MM

1-1/2″ – 48.26MM

2″ – 60.33MM

2-1/2″ – 76.1MM

3″ – 88.9MM

4″ – 114.3MM

5″ – 139.7MM

6″ – 165.1MM

The post Medium Wall Grooved Galvanised Steel Pipe / Tube 3200MM Lengths appeared first on Pipe Dream Fittings.

Length:

1/4″ – 50mm

1/2″ – 35mm

3/4″ – 40mm

1″ – 40mm

1-1/4″ – 50mm

1-1/2″ – 50mm

2″ –  50mm

Check out our whole range of black malleable pipe fittings here.

The post Weld Nipple BSP Black malleable Iron appeared first on Pipe Dream Fittings.

Design Test Pressure:

Hydrostratic test at ambient temperature

Fittings made from tube – 50bar

Fittings made from solid bar or forgings (most fittings in sizes 50mm or smaller) – 150bar

Standard: BS EN 10241 (formerly BS1740)

Material: Mild Steel

Thread: BSPP

The post Mild Steel Black Half Socket Weldable (MEDIUM WALL) appeared first on Pipe Dream Fittings.

A mild steel female BSPP threaded Full Socket in black finish

For our Reducing Socket BSP in Black Malleable Iron Please Click Here

For our Full Socket BSP in Black Malleable Iron Please Click Here

For our Full Socket BSP in Galvanised Malleable Iron Please Click Here

Check out our whole range of black malleable pipe fittings here.

The post Full Socket BSP Mild Steel Weldable (Medium Wall) appeared first on Pipe Dream Fittings.

Female threads are BSP parallel, male threads are BSP taper to ISO 7-1 (except for longscrews and running nipples where parallel threads are to ISO 228-1).

Fittings are produced from mild steel forgings, solid bar or tube.

Available as self colour or with zinc protective coating. SEE

Self colour fittings are suitable for welding.

Zinc protective coating can be hot dip galvanising (minimum average coating 55µm) or Delta Protekt zinc flake.

Only self colour fittings should be used with steam.

The post SOCKET REDUCING GALVANISED Mild Steel Screwed Pipe Fitting appeared first on Pipe Dream Fittings.

Female threads are BSP parallel, male threads are BSP taper to ISO 7-1 (except for longscrews and running nipples where parallel threads are to ISO 228-1).

Fittings are produced from mild steel forgings, solid bar or tube.

Available as self colour or with zinc protective coating. SEE

Self colour fittings are suitable for welding.

Zinc protective coating can be hot dip galvanising (minimum average coating 55µm) or Delta Protekt zinc flake.

Only self colour fittings should be used with steam.

The post SOCKET REDUCING BLACK Mild Steel Screwed Pipe Fitting appeared first on Pipe Dream Fittings.

Female threads are BSP parallel, male threads are BSP taper to ISO 7-1 (except for longscrews and running nipples where parallel threads are to ISO 228-1).

Fittings are produced from mild steel forgings, solid bar or tube.

Available as self colour or with zinc protective coating. SEE

Self colour fittings are suitable for welding.

Zinc protective coating can be hot dip galvanising (minimum average coating 55µm) or Delta Protekt zinc flake.

Only self colour fittings should be used with steam.

The post REDUCING TEE GALVANISED Mild Steel Screwed Pipe Fitting appeared first on Pipe Dream Fittings.